Haus
I am Big Balls!
- 14,761
- 60,194
And then once every 6 months or so... Go around the machine and tighten them all again.
- 1
3d Printing and the Future of Piracy
- Thread starter Adebisi
- Start date
Brad2770
Avatar of War Slayer
- 5,221
- 16,412
It was made in China. Will it last 6 months?And then once every 6 months or so... Go around the machine and tighten them all again.
Haus
I am Big Balls!
- 14,761
- 60,194
I've got an Ender 5 Pro and it's been a rockstar for me for almost 3 years now. Pretty sure it's almost pure chinesium. I've done a few mods (direct drive feeder, bed level Z stabilizing supports, Octoprint) but nothing insane. But also every 6 months I do a "maintenance" where I basically tear down the hotend, clean shit, check belts, rebuild it, and (as mentioned) go around and retighten anything that's started coming loose.
I cannot recommend their magnetic print bed system enough. After years of Glass bed, then PEI sheet, then this, that, and the other with my first 3d printer. I got this one, and it had a magnetic sheet to print on and it was a life changer.
- 1
Brad2770
Avatar of War Slayer
- 5,221
- 16,412
Ever since my kid has been around 5 years old, I have been telling him I am building him a jet pack. For the longest time he really thought I was building him one and it never came to be. I had intentions of building one from foam and quickly painting it, but never did. Now it’s a joke between him and I.
My son is graduating next spring. I have both resin and filament printers, so I figure I could 3D print this thing. I have paints and an air brush set. I would like to make him one for his graduation gift.
I was hoping I could find an STL for the Rocketeer pack for sure and maybe the helmet. I have Googled things, but no such luck. It doesn’t have to be the one from Rocketeer, I suppose any could do.
Any good places to start to find something like this?
My son is graduating next spring. I have both resin and filament printers, so I figure I could 3D print this thing. I have paints and an air brush set. I would like to make him one for his graduation gift.
I was hoping I could find an STL for the Rocketeer pack for sure and maybe the helmet. I have Googled things, but no such luck. It doesn’t have to be the one from Rocketeer, I suppose any could do.
Any good places to start to find something like this?
Hekotat
FoH nuclear response team
- 12,508
- 12,398
Check grabcad, there are a ton of these websites though. Not sure if thingiverse still exists but that's another.
- 25,021
- 68,664
Rocketeer Jetpack by drokle
Wearable artist fan art of the jetpack from the Rocketeer. Should fit an average size adult. Back plate may not be necessary depending on how you want to wear it. Back pack frame and/or straps are not included. Hoses and some hardware not included. This is shared as is. I am providing the full...
www.thingiverse.com
Rocketeer Jetpack by Longshot
Pulled my design. I'm sad that I had to do this, but recently found out my design is being sold on Ebay for a pretty penny. I did not authorize this user to use these photos or anyone else's photos. A report has been filed, but its unknown to me if Ebay will pull the listing. I'm all for sharing...
www.thingiverse.com
- 3
Hekotat
FoH nuclear response team
- 12,508
- 12,398
If anyone is looking for an upgraded CR-6 Max with tons of goodies and upgrades for a steal hit me up. I'm unable to print in this house due to how drafty it is and I don't want to spend another 2k in order to get it working. Send me a PM if you're interested.
Goatface
Avatar of War Slayer
- 10,416
- 17,401
NY bill would require a criminal history background check for the purchase of a 3D printer capable of creating firearms
www.nysenate.gov
NY State Assembly Bill 2023-A8132
Requires a criminal history background check for the purchase of a three-dimensional printer capable of creating firearms; prohibits sale to a person who would be disqualified on the basis of criminal history from being granted a license to possess a firearm.
- 1
- 1
Palum
what Suineg set it to
- 29,215
- 48,946
Isn't this basically any FDM printer? Doesn't say it has to be a good firearm or last more than a shot or two.NY bill would require a criminal history background check for the purchase of a 3D printer capable of creating firearms
NY State Assembly Bill 2023-A8132
Requires a criminal history background check for the purchase of a three-dimensional printer capable of creating firearms; prohibits sale to a person who would be disqualified on the basis of criminal history from being granted a license to possess a firearm.
Captain Suave
Caesar si viveret, ad remum dareris.
- 5,677
- 9,744
chthonic-anemos
bitchute.com/video/EvyOjOORbg5l/
- 8,606
- 27,294
The political flunkies might care about weapons and whatever else they come up with but it's just a pretext. There will be more and more legislation of 3d printing, across the world, with the real goal of preventing the loss of patent wealth.
Palum
what Suineg set it to
- 29,215
- 48,946
Are patents really the issue? I feel like even copyright is a bigger potential concern (e.g. I can just print this Donald Duck statue instead of buying it from the store). I'm not even sure we're anywhere near this even with those fancy ink jet full color ones. I suppose there's some right (or capability) to repair stuff as you get into the ability to create parts (especially with metal sintering).
I dunno, I kinda struggle to find stuff to print at home on the regular. Even if it was very robust, I'm not sure how much upside there is for FDM in the near future to the scale you're talking about.
I dunno, I kinda struggle to find stuff to print at home on the regular. Even if it was very robust, I'm not sure how much upside there is for FDM in the near future to the scale you're talking about.
Aazrael
Avatar of War Slayer
- 3,874
- 15,216
Running low on both resin and Iso propanol now. Have not been printing a whole lot lately but do anyone know if the water washable resin is better/good now?
Heard both good and bad thoughts about it a year or two ago. Been using Phrozen 4k but the cleaning is a bit annoying with all the contamination of isopropanol.
Heard both good and bad thoughts about it a year or two ago. Been using Phrozen 4k but the cleaning is a bit annoying with all the contamination of isopropanol.
Palum
what Suineg set it to
- 29,215
- 48,946
Is there really even a theoretical benefit aside from saving you from purchasing alcohol?
Aazrael
Avatar of War Slayer
- 3,874
- 15,216
They can be more brittle if I understand correct. But might be a brand issue as well.
I've been using Phrozen 4k Aqua Grey (Not water washable) and its been great. Can clean the liquid a few times when the resin settle at the bottom of the jar.
Would be nice to just rinse with water though unless it gives worse results in the prints.
Hekotat
FoH nuclear response team
- 12,508
- 12,398
I haven't been able to use my printer since I moved to this new place. It's not insulated well enough and is too drafty to print with sadly. Saving up to get a place with a shop. Gonna go HAM on CNC and 3D printers.
BrutulTM
Good, bad, I'm the guy with the gun.
- 15,099
- -1,040
What are you going to do with them? I think 3d printers are really cool, but have never been able to find an actual use for them outside of fast prototyping mechanical parts for engineers.
Hekotat
FoH nuclear response team
- 12,508
- 12,398
Just depends, I want to experiment more with carbon fiber solutions for PC cases and ideas I have.
- 1
Hekotat
FoH nuclear response team
- 12,508
- 12,398
Nice 3D printed PC case.
www.printables.com
BeamCase SW - SFF sandwich case in 18 different sizes (7.2-10.3l) by BeamCase_Design | Download free STL model | Printables.com
BeamCase Sandwich allows you to create your own sandwich style ITX case that fits perfectly to your hardware. | Download free 3D printable STL models
www.printables.com
Last edited:
- 2