- 46,572
- 214,282
There are also pretty cheap gutter clips you can get so you put holes in nothing and you can reuse them every year.
Amazon product ASIN B0BG2DFHMC
Home Improvement
- Thread starter Picasso3
- Start date
-
Guest, it's time once again for the massively important and exciting FoH Asshat Tournament!
Go here and give us your nominations!Who's been the biggest Asshat in the last year? Give us your worst ones!
There are also pretty cheap gutter clips you can get so you put holes in nothing and you can reuse them every year.
Amazon product ASIN B0BG2DFHMC
Palum
what Suineg set it to
- 26,508
- 41,229
No. You poors can't afford copper, but they do exist. As do steel/galv steel/etc.
- 1
- 46,572
- 214,282
Certainly some are. They still deteriorate with water contact under the paint.
- 1
Palum
what Suineg set it to
- 26,508
- 41,229
That's not true aluminum is immune to water, that's why aluminum boats can't sink.
ToeMissile
Pronouns: zie/zhem/zer
- 3,161
- 2,050
Daidraco
Avatar of War Slayer
- 10,045
- 10,357
I was about to say - I started to do a small project like that and the wood prices are fucking outrageous enough that I said fuck it. I may revisit the idea later, but I'll seriously contemplate using an actual professional to do it so Im not just wasting money on idiotic mistakes. Are you planning on doing pull out drawer's for the lower shelves? Or are those just going to be a "Use in case of apocalypse" kind of shelves? lol
- 26,226
- 39,930
Nahh its just to put some canned shit, maybe some boxes of dry goods, bread, potato and rice on bottom. Maybe some larger pots and pans? But like I said it usually ends up being a catch all for BS too, lol. Its lots of storage space in what was a dead part of the stair case going down to basement. I dont have a truck so I had to buy home cheapo 4x2 sheets of 1/2 in ply which was like $13 a piece, then 1/4 thick 4x2 for the walls which was like $9 a piece, then all the trim, its fucking crazy how much that shit all adds up to. Only thing that was cheap was the studs which were like $4 for 9 footers. and the primed bifold door 30" made all out of pressboard BS was like $150? or thereabouts.
Last edited:
- 1
Lanx
<Prior Amod>
- 65,205
- 146,986
- 26,226
- 39,930
The kids did most of it, I just supervised. There are a few fuckups up close, but meh, its a closet.
- 12,701
- 49,321
I used these this year and it's the way to go IMHO. Easy to snap up, quick deployment leads to happy me....
And now my house looks like someone pulled a clown car into the front yard and set off an IED under it.
- 6
Palum
what Suineg set it to
- 26,508
- 41,229
I had similar ones and even the pole to install and remove them. Unfortunately they don't work with the gutter guards I had installed. RIPeroni.
Blakkheim
Karazhan Raider
- 8,166
- 37,342
Just installed one of these. I can't believe I never thought of doing this sooner. Instead of pumping warm air from the dryer outside into nowhere, redirect it inside during the winter months.
Amazon.com
Amazon.com
- 1
ToeMissile
Pronouns: zie/zhem/zer
- 3,161
- 2,050
Just installed one of these. I can't believe I never thought of doing this sooner. Instead of pumping warm air from the dryer outside into nowhere, redirect it inside during the winter months.
Amazon.com
My concern would be all the humidity.
- 3
Blakkheim
Karazhan Raider
- 8,166
- 37,342
Definitely something I thought about. However, I'm in a semi-desert mountainous area with relatively low humidity most of the time so more moisture in the air certainly won't hurt. I'm going to be keeping a close eye on it but I'm not expecting too much of an issue but we'll see how it goes. Now, if you're in the eastern half of the country or the pacific NW and have much higher relative humidity, I can see how it might turn into a problem.
ToeMissile
Pronouns: zie/zhem/zer
- 3,161
- 2,050
When I was a kid I knew a family who routed the dryer air inside. I don't what their set up was but I just remember the room with the output was terrible, condensation on windows, etc. This is foothills of the Sierras, north of Sacramento a little more than an hour.
As long as the output gets distributed a bit or at least goes into a larger room it should be ok.
Lanx
<Prior Amod>
- 65,205
- 146,986
a few months ago old man neighbor said "hey i don't think my dryer vent isnt working, can you take a look?" so he turned on his dryer and we both look at his vent and no air came out. then i went inside and i wanted to see the backside and we moved it and i was like wth, theres the regular connection to the wall, then theres a "y" fitting and it goes to the floor.Just installed one of these. I can't believe I never thought of doing this sooner. Instead of pumping warm air from the dryer outside into nowhere, redirect it inside during the winter months.
Amazon.com
i'm like "i think your vent is routed down your crawl space, for some odd reason", and since no one is gonna crawl down there, we just left it.
then 2weeks ago since he said he was selling, i offered to be nice and said i'd power wash his siding for him since it looked kinda mossy, while hooking up the water, i smelled fabric softener and found his vent, it was buried behind a bush and on the opposite side of the house from where the dryer is.
no idea why
Kobayashi
Ahn'Qiraj Raider
- 780
- 1,944
Clearly it was to provide the best chance of filling up with dryer lint and creating a fire hazard.
Speaking of dryer vents, has anyone used one of these new heat pump dryers that don't use them?
- 46,572
- 214,282
A friend who lives nearby had never insulated their basement. Unreal. They said they never went in the basement in the winter because it was freezing cold. They got about $600 of insulation and today I insulated their whole basement. They commented immediately that the floors on the main floor were instantly warmer. These are smart people, I can't figure out how some people can be so dumb about houses.