Have you considered that you could have all the work of a roller with the clean up of an airless sprayer??
Yeah, but have you considered that you could have all the clean up of a work, with the roller of an airless sprayer?
Have you considered that you could have all the work of a roller with the clean up of an airless sprayer??
I'd bet most people buy shitty brushes. Edging with a $2 Home Depot brush is an exercise in pain. (Ask me how I know...)Doing the edges with a brush isn't hard or time consuming. The more you do it, the easier it gets. And I don't get people who spend all the time with taping the edges. It's not hard to make a really good edge with a brush and no tape. Edge first, roll second, boom. Bob's your uncle.
I'd bet most people buy shitty brushes. Edging with a $2 Home Depot brush is an exercise in pain. (Ask me how I know...)
This was me as well. My mom was visiting a few years back when we were painting some rooms and she gifted us a $40 something Purdy brush and insisted it makes a huge difference edging. Of course, it did make a huge difference (and I miraculously still have the brush).I'd bet most people buy shitty brushes. Edging with a $2 Home Depot brush is an exercise in pain. (Ask me how I know...)
Yes I mean I intend to still use it for ceilings because they look better without the orange peel.I still like my Graco for interior jobs. Just not really small ones. The air spray surface just looks so much better than a rollers surface does, imo. The bad part, as you found out - is repairing a section is a pain in the ass cause any discrepancies stand out like a sore thumb.
Still though - air sprayer, even if you dont use it at home, earns its keep at any rental property you may have.
Son, you're talking to someone who uses the King's brushes (Windsor and Newton Series 7s) all the time. Please do not bring up peasant brands with synthetic bristles.You're not wrong. Get a good Purdy or Wooster brush with a handle that feels good in your grip. It will improve your life considerably.
The problem with HVLPs is you need the right compressor that handles the actual volume of air needed to run the gun right. Otherwise I'd probably have one of those too...
yea i have an inline filter/regulator coming in, i have 1gallon ryobi that i expanded w/ a 11g harbor freight, my area could use touch ups, i'll probably just spray w/ water for a while to get used to itI like my HVLP for some finishing on wood/small furniture but yeah, I was shocked at the volume needed to consistently run it. My pancake Dewalt compressor lasted about 30 seconds. Looking to upgrade to something larger, maybe just grab a 30 gallon Fortress from Harbor Freight to have around.
Alternatively my Graco Magnum works very well with the correct tip.
Not really following the whole conversation but thought the comment about the HVLP and compressor was interesting enough since it caught me.
Water doesn't work great because it's not viscous enough. Most house paint sprayers are meant to shoot unthinned paint buuuut the reality is some of the newer paint/”primer" latex paints are exceptionally thick.yea i have an inline filter/regulator coming in, i have 1gallon ryobi that i expanded w/ a 11g harbor freight, my area could use touch ups, i'll probably just spray w/ water for a while to get used to it
also do i have to thin house paint?
Anyone with half a brain knows duct tape is the way to go.Hey guys, has anyone ever tried using packing tape to patch holes in drywall with?
Hey guys, has anyone ever tried using packing tape to patch holes in drywall with?
Putting aside the fact that it will leave an outline that will be visible, I can't imagine paint adhering to packing tape very well, and even if it does, it would have a different finish/sheen to the drywall around it.
Need some help gauging the efficiency of my grandma's wall mounted AC unit and whether or not we need to replace it.
It's pretty old, at least early 80's but likely older. Wood grain panel Kenmore Coldspot manufactured for Sears. Model Number on info plate doesn't yield any results online
I can't find the wattage rating on the info plate, but I know it runs at:
8000 BTU/HR
7.5 Amps AHAM
Rated Volts: 115
Operating Volts: Min - 103.5 Max - 126.5
1 Phase - 60 Hz
Apparently, the wattage can be found by multiplying volt to current rating. I'm guessing that means 115(rated volts) x 7.5(amps) = 862.5 watts?
Dividing BTU by the wattage leaves me with 9.28 EER. Apparently an EER of 10 or higher is more desirable?
It does a decent job of cooling, but we're wondering if there's anything better on the market that could cost less energy and reduce the electric bill every month.
Is my original math to figure out EER/SEER good?Just skimming some reviews, this one is 15 SEER for $250. That saves just under half the electricity for the same cooling. You can do the math on how long you think it runs and figure out a payback period.
Amazon product ASIN B08677DCKN
Is my original math to figure out EER/SEER good?
also spoiler for size pics of the unit:
View attachment 488972
View attachment 488973
View attachment 488974
The filter doesn’t seem particularly dirty, just stained
View attachment 488975