Well the BIOS is something I knew nothing about prior to setting this up, now I know just slightly less then nothing - I had to ensure that my bios was set up ion AHCI mode to use my SSD correctly, and I also had to adjust which hard drive it was booting first (or at least I think I had to - it was showing the HDD as the first hard drive and the SSD as the second so I changed the priority order. Other then that, what sort of things should I be looking for?
Ill look into prime95, as for everything being cool the fan appears to be working correctly and I dont feel any excess heat, but I am guessing there is a more scientific method to checking? Im honestly not that versed in DYI computer stuff, especially hardware related - of course, I am learning now so that will all change as time goes by
Device manager does actually show an unknown device, and I *almost* disabled it but was still uncertain if it is there for a reason? Well, it isnt an "unknown device" but rather it -- huh, actually now I see TWO devices that I dont actually have - it says I have a fax, and a printer, but I dont have either... I assume I should disable them?
Ill open her up and look at the RAM situation, I wasnt sure what DIMMS was but after googling it I am still not quite sure what I am looking for exactly, except just making sure the RAM is insterted correctly?
The monitor is plugged in to the "top" graphics card (sitting above the other as they sit in my computer, closer to the rest of the motherboard) so that should be all good
The CPU fan seems to be working properly, I installed it correctly (i think!!) and fans are blowing cool air out... I had to play around for a few minutes during install to figure out how to get the arrows pointing the right way and still be able to plug the fans into the motherboard using their cables, but I did end up getting it (i think!)
Sorry for the undoubtedly noobish lack of knowledge here, but at least I am trying right?
