Woodworking

  • Guest, it's time once again for the massively important and exciting FoH Asshat Tournament!



    Go here and give us your nominations!
    Who's been the biggest Asshat in the last year? Give us your worst ones!
Burns

Burns

Avatar of War Slayer
7,576
14,861
Bandwagon said:
I bought a $30 soda blaster just to try cleaning this thing up. Didn't do shit. Will a nicer one have a chance at cleaning this up? Or different abrasive? Or am I going down the wrong rabbit hole?
View attachment 455857View attachment 455858
Click to expand...
They don't make a polishing bit for the CNC? Something that is "soft" where it might take 3 or 4 passes to even notice anything is happening? Maybe a process you would need to learn how to adjust the wood/software to accommodate it.

That ply looks real good though; don't see any voids for sandblasting/soda to get under and destroy.

Edit: Honestly, that looks pretty good. Some of the best you have posted in this thread. You may be able to light stain, put a coat of polly over it, then a light sand/buff, to make it look smoother, if that's what your going for. Maybe different finished liquids will do different things. Like rubbing a finishing wax directly into the wood... or linseed oil... or lacquer/shellac... (to throw out ideas that might be worth testing/researching, if you haven't already).
 
Last edited:
  • 1Like
Reactions: 1 user
whoo

whoo

<Silver Donator>
1,475
6,270
  • 1Like
Reactions: 1 user
Bandwagon

Bandwagon

Kolohe
<Silver Donator>
24,563
66,010
Thanks Burns Burns , I'm happy with this one too (so far). I haven't tried using polishing stuff in the CNC yet. The cone-shaped polishing bit for my dremel is what I was thinking of using, but I want something like that that's about 220grit and abrasive, along with being squishy. If I can find a bit like that, I'll just use it in the same 3D finish toolpath I use. But that takes about 7 hours to run, so I was hoping something like a soda blaster could do it in 20 minutes.

Thanks for the recommendation whoo whoo . Ordered them yesterday, we'll see how they do.

Edit - maybe this is something to try in the machine 1" Nylon Abrasive End Brush at Grizzly.com
 
Last edited:
  • 1Like
Reactions: 1 user
whoo

whoo

<Silver Donator>
1,475
6,270
Bandwagon said:
Thanks Burns Burns , I'm happy with this one too (so far). I haven't tried using polishing stuff in the CNC yet. The cone-shaped polishing bit for my dremel is what I was thinking of using, but I want something like that that's about 220grit and abrasive, along with being squishy. If I can find a bit like that, I'll just use it in the same 3D finish toolpath I use. But that takes about 7 hours to run, so I was hoping something like a soda blaster could do it in 20 minutes.

Thanks for the recommendation whoo whoo . Ordered them yesterday, we'll see how they do.

Edit - maybe this is something to try in the machine 1" Nylon Abrasive End Brush at Grizzly.com
Click to expand...
If you try that brush from Grizzly, please let us know. It says it strips paint, rust and weld scale. Sounds like it might be too rough, but it's good to have options
 
  • 1Like
Reactions: 1 user
Intrinsic

Intrinsic

Person of Whiteness
<Gold Donor>
15,252
13,650
Make sure Grizzly doesn’t require $299 and lift gate service to ship it!

I kid… I kid…
 
  • 1Like
  • 1Worf
Reactions: 1 users
Intrinsic

Intrinsic

Person of Whiteness
<Gold Donor>
15,252
13,650
whoo said:
I'm glad. I do some complex carvings for my church, and i find them invaluable. Also sanding sponges. And micro files. :)
Click to expand...

Do you have a go to for sponges? I used some Amazon Chineseum ones on a recent project and was wondering what the “quality” version was. 3M I guess hah
 
Dandai

Dandai

<WoW Guild Officer>
<Gold Donor>
5,918
4,504
Intrinsic said:
Do you have a go to for sponges? I used some Amazon Chineseum ones on a recent project and was wondering what the “quality” version was. 3M I guess hah
Click to expand...
Potentially relevant to your interests:



 
  • 3Like
Reactions: 2 users
whoo

whoo

<Silver Donator>
1,475
6,270
Intrinsic said:
Do you have a go to for sponges? I used some Amazon Chineseum ones on a recent project and was wondering what the “quality” version was. 3M I guess hah
Click to expand...
Unfortunately, I have not found a source for high quality sanding sponges that fills all my needs. I do use the 3M sanding sponges as well as the roloc "finger" type sanders. They also make a scotch brite ball you can put on a drill press and go to town. These are great but sometimes too large.

For really fine stuff I use jeweler's files (diamond and cut files) as well as tiny rifflers and rasps. Corradi (Italy) is one of the best sources for those.

Other than that, I buy or make what I need. Or use chinese junk if I can't find anything else
 
  • 2Like
Reactions: 1 users
whoo

whoo

<Silver Donator>
1,475
6,270
Dandai said:
Potentially relevant to your interests:



Click to expand...

I am friendly with Matt. He's a great guy and a very creative problem solver. I made those demanding sanding blocks a couple of years ago and they work great for keeping crisp edges. I put 80, 120, 220 grit belts on the 3 I made. The belts last forever it seems.
 
  • 2Like
Reactions: 1 users
Borzak

Borzak

Bronze Baron of the Realm
25,909
33,859
Different kind of woodworking. Found these pics from a few years ago. For scale it's all on a solid core door. Cap 232 with an 84" wingspan and 80cc gas engine. Have some of thse completed plane and a 96" wingspan Extra 300 with a 100cc gas engine in flight I'll have to find. Lite ply and balsa construction with foam core balsa sheeted wings. Oh no I never rekitted one (crashed and walked off with nothing but sticks), closest was I squashed the landing gear on an 80" wingspan plane when one of 2 elevator servos locked.

DSC00497.JPG


DSC00498.JPG
 
Last edited:
  • 2Like
Reactions: 1 users
Intrinsic

Intrinsic

Person of Whiteness
<Gold Donor>
15,252
13,650
You know it has been a long time since you broke down lumber (or did anything) when you cut the stiles and rails for 6 drawers, do all the tongue and groove, then remember a 1x2 in the plans you wrote up are actually 1.5” and not 1.75”.

Not a big deal to fix but I had to laugh at myself looking at it going “why are all these drawer fronts off by 1/2 an inch??”
 
  • 1Solidarity
Reactions: 1 user
Intrinsic

Intrinsic

Person of Whiteness
<Gold Donor>
15,252
13,650
I must have just gone to sleep the whole week that the drama surrounding Odie’s happened. I remember when Lincoln Street put out that video and just last week Inspire Woodcraft did one that he pretty much just said verbatim “fuck that guy.” It’s hilarious but have no idea why and haven’t bothered to look.

I think that video is what made me switch over to General Finish.
 
Intrinsic

Intrinsic

Person of Whiteness
<Gold Donor>
15,252
13,650
That's awesome. The tennon cutter saw is interesting, now sure I've seen that before.

The bit he was using to clean out the mortise didn't look like a pattern or flush trim bit, didn't see a collar on it. If that was freehand that's pretty great. I'd probably end up screwing those up.

I'm also about 10 seconds away from buying a track saw (Festool or otherwise). Been breaking down a lot of plywood sheets lately and god it is a huge pain in the ass.
 
C

Captain Suave

Caesar si viveret, ad remum dareris.
5,372
9,132
Intrinsic said:
That's awesome. The tennon cutter saw is interesting, now sure I've seen that before.

The bit he was using to clean out the mortise didn't look like a pattern or flush trim bit, didn't see a collar on it. If that was freehand that's pretty great. I'd probably end up screwing those up.

I'm also about 10 seconds away from buying a track saw (Festool or otherwise). Been breaking down a lot of plywood sheets lately and god it is a huge pain in the ass.
Click to expand...
The radial arm saw? Those are neat tools if you use them properly. The old use case documentation is written by sone hilarious evil genius.



Or did you mean the shaper he used to finish the cheeks? I think that was actually a giant router bit that looks like a blade.
 
Goatface

Goatface

Avatar of War Slayer
10,080
16,507
was looking up some of his tools, as never heard of king canada
1680542859499.png

price is in CAD$, $2,979 USD

appears he is sponsored or something by king as he is in bunch of their vids.

1680543367095.png

$4,704 USD
1680543724209.png

$1,862 USD, base is $372
 
You must log in or register to reply here.